Injection mould What should be paid attention to in the storage and management of

Today, I would like to introduce the storage and management of injection molds to you.

The storage and management of injection molds is an important work in the injection molding industry. If the storage and management of molds are not in place, the injection molds will be rusted and damaged. It takes a long time to find the mold or use the wrong mold or even lose the mold.

Injection mold is a very precise work, and its cost is very high, so it needs to be protected against dust, rust and pressure. After the production is completed, the mold should be inspected and rust proofed, and the mold should be placed on the mold rack according to the regulations It is required in the "Maintenance" code to use the mold, prevent the mold from being damaged due to human carelessness, extend the service life of the mold, ensure smooth production and stable product quality, reduce downtime for mold repair, defective rate and material consumption, and reduce production costs.

Xiao Bian tells you that the storage place of injection mold should be flat, dry and clean, which is convenient for lifting and handling. Small molds can be stored on shelves in order, and large molds can be placed directly on the cushion. The storage shall be classified, and the molds matching the same product shall be placed together. The specific method of storage is difficult to impose due to the different actual conditions and conditions of each unit, but the precautions are largely the same. The injection mold is mostly valued by the operator in use, but it is often ignored during storage. However, in actual production, heavy losses in production due to improper mold storage and storage have occurred from time to time, which must be paid attention to.

At present, there is no systematic standard model for mold management in most domestic plastic processing manufacturers, and management methods are formulated according to the size and characteristics of each manufacturer. Small and medium-sized enterprises and large enterprises, professional plastic plants and non professional plastic plants have different management methods. However, in terms of basic practices and expected purposes, they are largely the same. All enterprises shall establish a management system according to their own characteristics and actual conditions, so that the molds can be properly kept in management and reach the expected service life.